Bionic gear bags and sew-together bags are almost the same. They do not have any particular differences between them.
However, bionic gear bags are thicker and tend to be bulkier types. Whereas, sew-together bags are more of a purse type and thinner than bionic gear bags.
Comparison Between Bionic Gear Bag Vs Sew Together Bag
Although they are the same type of bag, you can still do some comparison between them based on some features of the bags. Let’s see –
1. Zipper Pockets
Bionic gear bags have four zipper pockets. Whereas sew-together bags have three zipper pockets.
Bionic gear bags have a completed width of 10 inches. On the other hand, Sew together bags have a completed width of 9 inches.
3. Exterior Fabric
Bionic gear bags and sew-together bags both have similar exterior fabric. They both have one fat quarter, which is 18 inches x 22 inches.
In addition, 1 – 18 inch x 22-inch piece of cotton batting or fusible fleece for quilting the exterior fabric. If the fabric is directional, you may have to make a seam in the middle so both pieces will be in the same direction.
4. Lining Fabric
For lining fabric, the Bionic gear bags have a 3⁄4 yard x width of fabric (WOF). Whereas, the sew-together bags have 1⁄2 yard x width of fabric (WOF). Here the fabric can be coordinated in pattern combinations.
5. Pocket Lining
In the case of pocket lining, Bionic gear bags have 1⁄2 yard x WOF (lining fabric). Whereas, sew together bags that have 1/3 yard x WOF. Again, the fabric here can be of coordinating pattern combinations.
6. Binding Fabric
Bionic gear bags have 2 pieces that will be at least 24 inches long and width 2 1⁄4 inches with several other pieces 18 inches long and wide 2 1⁄4 inches. Sew together have the same length and width for binding fabric.
7. Exterior Zipper
Bionic gear bags have a 1 – 22 inches standard polyester or nylon zipper or a 24” separating zipper as for the exterior zipper. Which is the same as the sew-together bags.
8. Interior Pocket Zippers
Bionic gear bags have 4- 12 inches or longer standard polyester or nylon zippers for the interior zipper. Whereas, sew-together bags have 3-11 inches or longer standard polyester or nylon zippers.
9. Side Panels
Bionic gear bags have 1⁄2 yard fusible or sew-in lightweight interfacing for side panels. Furthermore, sew-together bags also have the 1/2-yard fusible or sew-in lightweight interfacing for side panels.
10. Handles Fabric
Handles fabric of bionic gear bags and sew together bags both have 3 inches x 16 inches. However, the handle fabric and batting are optional for both of them.
As you can see, most of the features are common and similar between The Bionic Gear Bag and The Sew Together Bag. There are a few like the length, exterior, and interior pockets, zippers are not the same in number.
You can say, the bionic gear bag will be a little thicker than the sew-together bag. It also carries more items than the sew-together bag.
What Is a Bionic Gear Bag
The Bionic Gear Bag is a small and compact bag with four zippered pockets for storing sewing materials. It was mainly introduced for organizing and storing sewing notions conveniently.
So that you can carry them, wherever you go, without having any hassles. You can also use them for carrying your other items as well like mobile chargers etc.
What is a Sew Together Bag
The Sew Together Bag is a little bag with three zippered pockets, four open pockets, and a pincushion. Moreover, it has a great little needle landing all held together by a zipper that forms two handles to carry it.
This bag can easily hold your 8 inches long scissors, rotary cutter, marking pencils, seam ripper, extra needles, thread, snippers, and much more. It is a thin yet compact purse.
Frequently Asked Questions (FAQs)
Qu 1: Is The Bionic Gear Bag pattern any good?
This pattern makes a very cute bag and overall I am happy with it. On the other hand, I did run into some hiccups and perhaps my timing could have been better with purchasing this pattern. Sally AKA Ripstitcher designed the Bionic Gear Bag.
Qu 2: How do you make a cloth bag step by step?
At First, cut the fabric. For the first part of this DIY tote bag project, cut two 18″x14″ rectangles of both outer and inner fabric choices then cut two 18″x14″ rectangles of interfacing.
Then, snip the corners and add interfacing and sew sides. In addition, Create Corners. Lastly, piece together and Pin them, topstitch them and Finish.
Finally, we can say that both the bionic gear bag and the sew-together bag are for you to carry and organize your sewing materials and notions. They are both convenient and travel-friendly.
Whether you want a thick or thin bag for carrying your items, you just have to select between the bionic gear bag and sew together bag. So, depending on your sewing items, select your bag easily.