Binding can be done with a traditional sewing machine, where serging requires a more dedicated machine. Besides, there are some key differences regarding the usage and durability of the finished product.
Carpet binding vs turn and tack
Binding is to use a wrap of binding tape on the edges of the carpet and to sew it with a sewing machine. It is applied to a rough edge of a carpet. Therefore, the binding will provide your carpet a finished and tailored look.
On the other hand, turn and tack is to turn the desired or needed edge upside down to the ground and hide that edge down to the carpet. All we need in this method is a “z bar” along with a “tack strip”. But compared to binding, turning and taking your carpet will give not so much a finished look. But if you choose this method you can later fix the length of your carpet.
Compared to binding, turning and tacking are much easier and can be done in a short period. But if you want a better-looking carpet, it is better to choose to bind.
Serge carpet edge
Serging is almost similar to binding a carpet. In the binding method, you’ll need binding tapes of fabrics but in the case of serging, it is a continuous wrap of yarn around the edges.
What is a Serged Edge?
Serging is a quick method to hide the imperfections of a carpet. This process needs a serging machine and yarn. Even this process can be done by whip stitch with hand. It will look awesome but will take a lot of time. You can also choose yarn of different colors to make your carpet more attractive.
Serging carpet will provide a handy finish rather than a tailored finish. However, serging is also a good idea to finish or repair a carpet. Also, the whip stitches can be done by serging if you want a historic and great look.
Area Rug Binding
Rug binding fixes the worn edge of a rug with fabric tape and a sewing machine. It is known as the easiest and least expensive method to finish or repair an edge of a carpet. Also, you can give your carpet a classic look by this method.
In the case of rug binding, you will get options to use different colored edges by choosing colorful tape. You can find binding tapes of a different color. Using different colors as an edge will give a more bold finish to your rug. It will also provide your rug a unique look.
So, area rug binding is an easy process and it will cost you low money. This process uses straight binding to the used tape and rough carpet surface. Also, a damaged rug can be easily repaired because of the easy stitching. Rug binding will provide a tailored and unique look to your carpet and will also cost low.
Frequently Asked Questions (FAQs)
Q: Can I do carpet binding by hand?
Ans: Professional carpet binding requires at least a sewing machine. This ensures a proper workflow over the carpet surface. But some unique ways allow you to do carpet binding by hand. Most of them are considered DIY methods.
Q: Can I do serging on a carpet by hand?
Ans: Serging with a sophisticated machine requires much less time than doing it by hand. Yet, some folks prefer to start by hand gradually moving towards machines. In some cases, especially when machine serging is expensive, serging by hand can be a better alternative.
Binding and serging are undoubtedly important for making carpets. In the end, the preference between these two depends on individuals. In some cases, serging can be a better option, despite its need for a dedicated machine. However, for some binding exceeds serging in the economic sense.