A magnetic snap button is a fastener that keeps a snapping sound when closed. Snaps are on pouches, jeans, purses, and shirts and are available in various sizes and finishes. Fasteners of a magnetic snap consist of four components: socket, stud, post, and capped post. Here socket and stud are the closure unit. Besides the post and cap post is the attached unit. Unfortunately, sometimes these units of a magnetic snap become shift, damaged, and do not line up properly. Then you need to repair or replace them immediately.
But with care and proper eagerness, you can fix your magnetic snap on your favorite jeans, purse, pouches, and anything required to fix. In this article, you can learn the process of how to fix a magnetic snap easily that won’t stay snapped. So, let’s get started.
How Do I Tight the Magnetic Snap That Won’t Stay Snapped?
At first, you have to measure the damaged or broken magnetic snap on your jeans or purse. Then you have to buy replacement magnetic jeans or purse snaps at craft and fabric stores. If your snap has broken or otherwise come off your jeans, take it with you to ensure a close-as-possible match or an appropriate match.
Then you have to remove the damaged jeans snap if it has not already come off the jeans. Slide a flathead screwdriver under your magnetic snap. After that, you need to try to pry your snap upward slightly. Two prongs should be folded through an opening in your magnetic snap backing. Now you have to try pliers to loosen these prongs and then detach your snap. In this case, you should repeat for the opposite half of the magnetic jeans snap.
However, make a small slit in a female-male dual-sided fabric-snap half. Then select a spot near the jeans snap, which makes it convenient to hide the slit. Now, cut into the fabric and remove the snap backing for both sides of the female-male snap halves.
However, you have to slide the new magnetic snap backing through the slit in your fabric and into the exact snap position. Then you should line up the opening in the magnetic snap backing with the appropriate jeans snap position. After that, threading the two metal tabs through the opening in the backing, you have to place the top half of your snap on top. Now fold the two tabs securely into the correct place and repeat it for the opposite half of the snap.
At the last stage, you need to hand-sew the slit in the fabric using neat and small stitches.
How Do You Fix a Broken Snap Button?
You can fix a broken snap button easily. For fixing a broken button, you need to collect some essential things such as snaps, a small hammer, a flathead screwdriver, and a snap tool. Then you have to place the fabric right side on a flat surface. Then insert the flathead screwdriver between the top and the base of the socket and stud. Actually, socket and stud are familiar with socket closure. Now insert your screwdriver between your fabric and the stud. In this stage, you should be careful not to tear the fabric with the screwdriver. Then lift your screwdriver until the snap pops off.
After that, you have to do the same task again and place the fabric right side up on a flat surface and then insert your flathead screwdriver between the top and base of your socket closure by lifting the screwdriver until the snap pops off. Repeating this task is essential to remove the socket closure on the opposite side of your fabric.
Now, use your snap tool to replace the snap button. So, place the top of the stud into the base of your tool. Then place the flat piece on the other side. However, put the snap tool underneath the fabric, and you have to insert the metal stud through the small hole in your fabric. After that, set the metal stud through the hole and then tap the top of the base with your hammer to firmly engage the stud base and stud.
So, put the socket piece in the base of the snap tool. Then place the bottom of the socket piece on another side of this tool. Then set your snap tool underneath your fabric and insert the ring through the hole in your fabric.
In the last stage, you have to use a hammer and tap the top of the snap tool to fix the socket base.
Frequently Asked Questions and Answers
Are Magnetic Snaps Strong?
Yes, magnetic snaps are strong enough. Fasteners of magnetic snap use magnets to fasten the layers of your fabric together. So, a magnetic snap provides a strong hold that will hold your project closed and secured.
Can I Wash My Magnetic Snaps?
You can wash your magnetic snaps. Magnetic snaps work similarly to ordinary buttons. It is possible to wash the magnetic snaps in the washing machine. Because they will behave like ordinary buttons while washing.
Are All Snaps the Same Shape and Size?
No, all the snaps are not the same shape and size. Snaps come in a variety of shapes and sizes. You can get snaps from 1/8″ in diameter up to about ¼ inch. Most snaps are round, and there are multiple holes around the perimeter. But some snaps are hexagonal, square, and novelty shapes like hearts, flowers, etc.
Magnetic snaps are essential when you have jeans, purses, shirts, and pouches. Because, nowadays, people want to save time. Since there need very little effort and time to use magnetic snaps, people like to use snaps most. Again, if you lost your magnetic snap or if it becomes damaged, then repairing it is very easy and simple.
Most of the snap fasters in the world are sized by their diameter in millimeters, in increments of entire millimeters. Snap fasteners from six to nineteen mm are generally available, and thirty mm are made.