There are many ways of joining two yarns in crochet. First of all, you have to join yarn with single crochet. Then you’ll be able to join yarn inside the crochet row or add a new color with slight modifications. Often magic knots and slip stitches prove to be more effective.
What is a Single Crochet?
To start with your single crochet you have to join an edge of single crochet to the piece you are working on. And this technique would work to join any two pieces with single crochets. This is called joining single crochets. It will give you a friendly flat join. Because it makes both edges face each other.
How to Connect Yarn When Crocheting: Single Crochet
At first, you need to take the stitch, yarn it over, and bring up a loop to finish that single crochet stitch you would typically yarn over again. Pull through these two loops, but instead of doing that, you must go into the 1st stitch on the piece that you are joining from the front to the back, and then your yarn is back here.
Then, yarn over, pull it through that piece you are joining to, and then through the loops on your hook. So, this is how you can construct the single crochet the same. But last yarn over has become a slip stitch to the piece you are joining to.
In a Nutshell
So, to cust a long story short, for joining yarn in single crochet, take the working piece, yarn it over, and bring up a loop and then into the next stitch on the piece that you’re joining from the front to the back. Grab the yarn from behind, bring it up through the part you’re joining to, and then straight through the two loops on your hook.
How to Join Yarn in Crochet in the Middle of a Row
First, start with your crochet and yarn over and pull up a loop with the old yarn, which is about to end, and drop it. Then for the yarn over that, you must pull through those two loops that you are going to take the new yarn. Leave a long tail, put the yarn in your hand, yarn over and pull through within two loops and then just tighten those in the back.
So, in the back, it just looks like two yarn tails, and go ahead, work right over there. But before doing that, you need to decide whether you want to do it with single crochet or double crochet because there will be a slight difference.
In double crochet, yarn over, go into the stitch, pull up a loop, and then yarn over, pull through two and change the yarns in the last yarn over no matter which stitch you are doing. And at last, you can do a bit overhand knot.
How to join new color yarn in Crochet
In your last row, in the very last stitch, don’t complete your single crochet when joining a new color. Go ahead and push through the stitch yarn over, pull through, and there should be two loops on your hook, now you must not complete this because you will change the color.
Now drop the first color and pick up your second color. With your new colored yarn, go ahead and fold the yarn in half, leaving about four inches of yarn on the tailor’s loose end. So pinch the two ones together with your thumb and index finger, and this will make it easier for you to grab it with your hook and pull the new color of yarn through the two loops of the last color you left on your hook. Click here to learn about t-shirt yarn and how to join them.
Do not tie the new color into the slipknot. Just fold it in half and pull it through into the two loops. Look, you already attached the two loops to your piece with the last color. After pulling the new color through, take your scissors and cut the old colors.
How to Join Yarn in Crochet Without Knots
Take a pointy tip needle. Go through the spiral straight up the middle of the yarn, push down a little bit, open up or penetrate the fibers of the spiral. Repeat the process until it covers 3 inches of the wave. Pull the needle through and repeat the process on the other side.
You will find a loop on the last end of the yarn. Take another string, stick it through the loop and pull it. Move all the thread, pull the tail through over the top of the first yarn.
How to Join Yarn in Crochet With Slip Stitch
Go under both of the top loops of that first stitch. Then yarn over and pull through all of those stitches. Lastly, slip stitches through that loop on your hook and tighten that down.
Insert your hook through the next two stitches, pull it through. Put your right sides together. Work across through both loops. Then, join a back loop on each side of the front loop with the inside loops. You may do the same with the outside loops. At last, pull your loop out and tighten it.
How to Join Bulky Yarn in Crochet
Leave a longer tail, do the piles, untwist them to divide the strand in half. Take one of the piles of the new yarn and attach it to one of the points of the old string. So the knot stays at the very bottom of the stitch. Attach the two piles with the square knot, so they are pretty secure. Leave these tails put them aside.
Take the other ply of the old yarn and the ply of the new thread. Twist them like an inverted V. twist the arms along the whole length of these tails and tie them loosely with just a straightforward knot.
How to Make Magic Knots?
Take two strands of yarn. Place the 1st strand over the 2nd strand and then wrap the 1st strand around the 2nd strand, and underneath them, you will create a loop with the 1st strand. Take the end of your 1st strand of yarn, place it through the loop you just created, pull it nicely.
Take the 2nd strand of yarn, wrap it over the 1st strand that the 1st strands are going over the top, and underneath the other strand, you will create a loop using the 2nd strand. take the end of the 2nd strand, pull it through the loop
Connecting yarn while crocheting can be of two types prominently. They are – single crochet and two crochets. It depends on your choice of which kind of crocheting helps you to acquire the desired design.